5 Steps to Install Bitcoin-Qt Faster - Bitcoin-en.com

Bitcoin Wallet

Everything about bitcoin wallets.
[link]

IdealCash

IdealCash deal coin is a Decentralized Digital Currency based on an Open-Source Peer-To-Peer Internet Protocol. It provides Proof-of-Stake (PoS) Block Generation Methods with separated target limits, granting everyone a 30% floating coin return rate! Also, transaction fee’s are extremely low, it’s only 0.0001 to transfer 10000000.00 coins!
[link]

3rd Generation Cryptocurrency

Nihilo Coin is easy to use, with a great development & research team behind it who are focused on bringing advanced technology and unique features to our community, which creates a stable network for web 3.0 infrastructure. Welcome to the future....
[link]

Withdrawing from Ignition/ACR in Bitcoin

Trying to withdraw some money from one of my accounts and don't have time to wait for the paper check. I've heard I can withdraw using bitcoin and have the money deposited into my local bank account in USD...is this accurate? I have no idea how bitcoins work and everything I read just confuses me more. Maybe I'm just old but probably I'm stupid.
Can anyone help explain how I need to go about this? I have Bitcoin-Qt downloading.
submitted by jaywa1king to poker [link] [comments]

Bitcoin Debug Console Issues

Hello Everyone
I have the latest version of BitcoinQt downloaded from bitcoin.org when i try to run the command addnode to whatever the ip of the node is i get this error message Method not found error code (-32601)
Is there any way to fix this?
submitted by Xercanion to Bitcoin [link] [comments]

Doordat thuisbezorgd.nl bitcoins accepteert stijgt het aantal gebruikers fors in Nederland.

Op 5 november steeg Nederland tijdelijk naar de derde plaats in de ranglijst van aantal bitcoin-qt downloaders. zie hier Normaal staan we altijd op de 8ste plaats.
submitted by aat58 to BitcoinNL [link] [comments]

OLD-FAIL: Remember when people counted Bitcoin-QT downloads as the bitcoin adoption metric?

Just recounting some old fail and old things we used to have to debate about.
Remember when people counted Bitcoin-QT downloads as THE bitcoin adoption metric?
Completely ignoring how cumbersome that is to use and is the worst wallet software for casual users to download, not even including download estimates for much more convenient wallet software like Electrum, or Multibit or the android apps and eventually iphone apps
submitted by 1blockologist to Bitcoin [link] [comments]

Bitcoin-QT 0.9 disponível para download

The Core Developers of Bitcoin released the 0.9.0 FINAL of Bitcoin Core (aka Bitcoin QT).
DOWNLOAD:
This is a Final Version, but its the same as 0.9.0rc3
Sources: https://github.com/bitcoin/bitcoin/releases http://sourceforge.net/projects/bitcoin/files/Bitcoin/bitcoin-0.9.0/ https://bitcoin.org/bin/0.9.0/README.txt
Bitcoin Core version 0.9.0 is now available from:
https://bitcoin.org/bin/0.9.0/
This is a release candidate for a new major version. A major version brings both new features and bug fixes.
Please report bugs using the issue tracker at github:
https://github.com/bitcoin/bitcoin/issues

How to Upgrade

If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), uninstall all earlier versions of Bitcoin, then run the installer (on Windows) or just copy over /Applications/Bitcoin-Qt (on Mac) or bitcoind/bitcoin-qt (on Linux).
If you are upgrading from version 0.7.2 or earlier, the first time you run 0.9.0 your blockchain files will be re-indexed, which will take anywhere from 30 minutes to several hours, depending on the speed of your machine.
On Windows, do not forget to uninstall all earlier versions of the Bitcoin client first, especially if you are switching to the 64-bit version.

Windows 64-bit installer

New in 0.9.0 is the Windows 64-bit version of the client. There have been frequent reports of users running out of virtual memory on 32-bit systems during the initial sync. Because of this it is recommended to install the 64-bit version if your system supports it.
NOTE: Release candidate 2 Windows binaries are not code-signed; use PGP and the SHA256SUMS.asc file to make sure your binaries are correct. In the final 0.9.0 release, Windows setup.exe binaries will be code-signed.

OSX 10.5 / 32-bit no longer supported

0.9.0 drops support for older Macs. The minimum requirements are now: * A 64-bit-capable CPU (see http://support.apple.com/kb/ht3696); * Mac OS 10.6 or later (see https://support.apple.com/kb/ht1633).

Downgrading warnings

The 'chainstate' for this release is not always compatible with previous releases, so if you run 0.9 and then decide to switch back to a 0.8.x release you might get a blockchain validation error when starting the old release (due to 'pruned outputs' being omitted from the index of unspent transaction outputs).
Running the old release with the -reindex option will rebuild the chainstate data structures and correct the problem.
Also, the first time you run a 0.8.x release on a 0.9 wallet it will rescan the blockchain for missing spent coins, which will take a long time (tens of minutes on a typical machine).

Rebranding to Bitcoin Core

To reduce confusion between Bitcoin-the-network and Bitcoin-the-software we have renamed the reference client to Bitcoin Core.

Autotools build system

For 0.9.0 we switched to an autotools-based build system instead of individual (q)makefiles.
Using the standard "./autogen.sh; ./configure; make" to build Bitcoin-Qt and bitcoind makes it easier for experienced open source developers to contribute to the project.
Be sure to check doc/build-*.md for your platform before building from source.

Bitcoin-cli

Another change in the 0.9 release is moving away from the bitcoind executable functioning both as a server and as a RPC client. The RPC client functionality ("tell the running bitcoin daemon to do THIS") was split into a separate executable, 'bitcoin-cli'. The RPC client code will eventually be removed from bitcoind, but will be kept for backwards compatibility for a release or two.

walletpassphrase RPC

The behavior of the walletpassphrase RPC when the wallet is already unlocked has changed between 0.8 and 0.9.
The 0.8 behavior of walletpassphrase is to fail when the wallet is already unlocked:
> walletpassphrase 1000 walletunlocktime = now + 1000 > walletpassphrase 10 Error: Wallet is already unlocked (old unlock time stays) 
The new behavior of walletpassphrase is to set a new unlock time overriding the old one:
> walletpassphrase 1000 walletunlocktime = now + 1000 > walletpassphrase 10 walletunlocktime = now + 10 (overriding the old unlock time) 

Transaction malleability-related fixes

This release contains a few fixes for transaction ID (TXID) malleability issues:

Transaction Fees

This release drops the default fee required to relay transactions across the network and for miners to consider the transaction in their blocks to 0.01mBTC per kilobyte.
Note that getting a transaction relayed across the network does NOT guarantee that the transaction will be accepted by a miner; by default, miners fill their blocks with 50 kilobytes of high-priority transactions, and then with 700 kilobytes of the highest-fee-per-kilobyte transactions.
The minimum relay/mining fee-per-kilobyte may be changed with the minrelaytxfee option. Note that previous releases incorrectly used the mintxfee setting to determine which low-priority transactions should be considered for inclusion in blocks.
The wallet code still uses a default fee for low-priority transactions of 0.1mBTC per kilobyte. During periods of heavy transaction volume, even this fee may not be enough to get transactions confirmed quickly; the mintxfee option may be used to override the default.

0.9.0 Release notes

RPC:
Command-line options:
Block-chain handling and storage:
Wallet:
Mining:
Protocol and network:
Validation:
Build system:
GUI:
submitted by allex2501 to BrasilBitcoin [link] [comments]

neue Podcast Folge 24 - bitcoinupdate.com

Guten Tag alle zusammen! Ich freue mich euch eine neue Folge unseres Podcast präsentieren zu dürfen:
http://bitcoinupdate.com/
schaut auf unserer Homepage vorbei oder abboniert unseren RSS feed um auf dem laufenden zu bleiben.
Unsere Folge 24 dreht sich um folgende Themen:
wir freuen uns auch immer über Feedback oder Gäste
submitted by apetersson to BitcoinDE [link] [comments]

New German Podcast Episode 24 - bitcoinupdate.com

-sorry for writing in German -
Guten Tag alle zusammen! Ich freue mich euch eine neue Folge unseres Podcast präsentieren zu dürfen:
http://bitcoinupdate.com/
schaut auf unserer Homepage vorbei oder abboniert unseren RSS feed um auf dem laufenden zu bleiben.
Unsere Folge 24 dreht sich um folgende Themen:
wir freuen uns auch immer über Feedback oder Gäste
submitted by apetersson to Bitcoin [link] [comments]

Bitcoinupdate - the German podcast has a new episode!

Andreas+Andreas bringen euch das Bitcoinupdate 35 - mit persönlichen Erlebnissen und den News der Woche.
Wir freuen uns über deine Meinung unter feedback -a- bitcoiupdate.com Wenn ihr automatisch über neue Folgen Bescheid bekommen wollt abonniert unseren RSS feed.
http://bitcoinupdate.com/index.php?id=26
submitted by apetersson to Bitcoin [link] [comments]

easy question regarding my bitcoin-qt wallet and bitinstant. please help me :(

hi all, planning on buying some bitcoins tonight for use on the road. pretty nervous I'll screw it up and lose 100 bucks so could somebody walk me through this? i have bitcoin-qt downloaded. it's synced. if i want to order $100 of bitcoins from bitinstant i use the address bitcoin-qt provided me right? i then go and pay 7-11 the exact amount and then bitinstant will credit my wallet with the amount in bitcoins? then i transfer from my wallet to the SR, make a purchase, and am delivered whatever it is I may have ordered? Is it that simple? Thanks for the help.
submitted by 207transition206 to Bitcoin [link] [comments]

Gridcoin 5.0.0.0-Mandatory "Fern" Release

https://github.com/gridcoin-community/Gridcoin-Research/releases/tag/5.0.0.0
Finally! After over ten months of development and testing, "Fern" has arrived! This is a whopper. 240 pull requests merged. Essentially a complete rewrite that was started with the scraper (the "neural net" rewrite) in "Denise" has now been completed. Practically the ENTIRE Gridcoin specific codebase resting on top of the vanilla Bitcoin/Peercoin/Blackcoin vanilla PoS code has been rewritten. This removes the team requirement at last (see below), although there are many other important improvements besides that.
Fern was a monumental undertaking. We had to encode all of the old rules active for the v10 block protocol in new code and ensure that the new code was 100% compatible. This had to be done in such a way as to clear out all of the old spaghetti and ring-fence it with tightly controlled class implementations. We then wrote an entirely new, simplified ruleset for research rewards and reengineered contracts (which includes beacon management, polls, and voting) using properly classed code. The fundamentals of Gridcoin with this release are now on a very sound and maintainable footing, and the developers believe the codebase as updated here will serve as the fundamental basis for Gridcoin's future roadmap.
We have been testing this for MONTHS on testnet in various stages. The v10 (legacy) compatibility code has been running on testnet continuously as it was developed to ensure compatibility with existing nodes. During the last few months, we have done two private testnet forks and then the full public testnet testing for v11 code (the new protocol which is what Fern implements). The developers have also been running non-staking "sentinel" nodes on mainnet with this code to verify that the consensus rules are problem-free for the legacy compatibility code on the broader mainnet. We believe this amount of testing is going to result in a smooth rollout.
Given the amount of changes in Fern, I am presenting TWO changelogs below. One is high level, which summarizes the most significant changes in the protocol. The second changelog is the detailed one in the usual format, and gives you an inkling of the size of this release.

Highlights

Protocol

Note that the protocol changes will not become active until we cross the hard-fork transition height to v11, which has been set at 2053000. Given current average block spacing, this should happen around October 4, about one month from now.
Note that to get all of the beacons in the network on the new protocol, we are requiring ALL beacons to be validated. A two week (14 day) grace period is provided by the code, starting at the time of the transition height, for people currently holding a beacon to validate the beacon and prevent it from expiring. That means that EVERY CRUNCHER must advertise and validate their beacon AFTER the v11 transition (around Oct 4th) and BEFORE October 18th (or more precisely, 14 days from the actual date of the v11 transition). If you do not advertise and validate your beacon by this time, your beacon will expire and you will stop earning research rewards until you advertise and validate a new beacon. This process has been made much easier by a brand new beacon "wizard" that helps manage beacon advertisements and renewals. Once a beacon has been validated and is a v11 protocol beacon, the normal 180 day expiration rules apply. Note, however, that the 180 day expiration on research rewards has been removed with the Fern update. This means that while your beacon might expire after 180 days, your earned research rewards will be retained and can be claimed by advertising a beacon with the same CPID and going through the validation process again. In other words, you do not lose any earned research rewards if you do not stake a block within 180 days and keep your beacon up-to-date.
The transition height is also when the team requirement will be relaxed for the network.

GUI

Besides the beacon wizard, there are a number of improvements to the GUI, including new UI transaction types (and icons) for staking the superblock, sidestake sends, beacon advertisement, voting, poll creation, and transactions with a message. The main screen has been revamped with a better summary section, and better status icons. Several changes under the hood have improved GUI performance. And finally, the diagnostics have been revamped.

Blockchain

The wallet sync speed has been DRASTICALLY improved. A decent machine with a good network connection should be able to sync the entire mainnet blockchain in less than 4 hours. A fast machine with a really fast network connection and a good SSD can do it in about 2.5 hours. One of our goals was to reduce or eliminate the reliance on snapshots for mainnet, and I think we have accomplished that goal with the new sync speed. We have also streamlined the in-memory structures for the blockchain which shaves some memory use.
There are so many goodies here it is hard to summarize them all.
I would like to thank all of the contributors to this release, but especially thank @cyrossignol, whose incredible contributions formed the backbone of this release. I would also like to pay special thanks to @barton2526, @caraka, and @Quezacoatl1, who tirelessly helped during the testing and polishing phase on testnet with testing and repeated builds for all architectures.
The developers are proud to present this release to the community and we believe this represents the starting point for a true renaissance for Gridcoin!

Summary Changelog

Accrual

Changed

Most significantly, nodes calculate research rewards directly from the magnitudes in EACH superblock between stakes instead of using a two- or three- point average based on a CPID's current magnitude and the magnitude for the CPID when it last staked. For those long-timers in the community, this has been referred to as "Superblock Windows," and was first done in proof-of-concept form by @denravonska.

Removed

Beacons

Added

Changed

Removed

Unaltered

As a reminder:

Superblocks

Added

Changed

Removed

Voting

Added

Changed

Removed

Detailed Changelog

[5.0.0.0] 2020-09-03, mandatory, "Fern"

Added

Changed

Removed

Fixed

submitted by jamescowens to gridcoin [link] [comments]

PSA: Enable Tor as a simple way to make your node reachable.

Become one of the 10% of node operators that receive incoming connections.
Installing bitcoin core is easy, and with pruning it really isn't the space sink it is characterized as. Even a modest computer can complete the initial block download (IBD) and become a full node. But what some users (90%) find a bit more challenging, is how to become a listening node. Listening nodes are an important part of the network, and are simple enough to enable. I can think of 4 ways to do it:
  1. Operate on an OS and Network that support uPnP, allowing bitcoin to open the ports for you.
  2. Subscribe to a VPN that allows you to open ports through their service.
  3. Manually configure your OS and network to forward port 8333 and 18333.
  4. Run Tor and direct bitcoin to listen through it.
I'll discuss #4. Obviously #1 or #2 are easier, but require a VPN subscription or uPnP enabled HW. And if you live in a dorm or don't control the network, Tor may be the only free option available.
As a bit of background, bitcoin supports three networks that your node can listen on:
Obviously, the more you enable, the better, but here are the basic steps for Tor in broad strokes. If you have any questions post them here and I'll see if we can't help you out:
  1. Download, verify1 and install Gpg4win
  2. Download, verify2, install, and launch Tor Browser
  3. Download, verify3, install, and launch Bitcoin Core
  4. Launch and Admin command console in the directory containing tor.exe
  5. Install the Tor service: tor.exe --service install
  6. CD to service dir: cd %windir%\ServiceProfiles\LocalService\AppData\Roaming\tor
  7. Create and edit a file called torrc with the contents suggested below
  8. Restart tor: tor.exe --service stop && tor.exe --service start
  9. Record the hostname: type .\HiddenService\hostname as
  10. Add the bitcoin.conf options suggested below
  11. Restart the bitcoin-qt program
  12. (Optional) Activate the bitnodes crawler at https://bitnodes.io/nodes/-8333/
It may take a while for your node to show up on bitnodes. I've found the check button sometimes has trouble with onions. Of course you don't need to do it, but it can provide a simple way to check status once your on the list.

torrc file: (replace c:\windows with the proper path as needed)

```

Change to C:\Windows\ServiceProfiles\LocalService\AppData\Roaming

Log notice file \tor\service.log

Bridges may be needed if the Gov't shuts down Tor exit nodes. Get Bridges by

emailing [email protected] from Gmail (only) and uncomment as follows:

Bridge obfs4 : cert= iat-mode=

HiddenServiceDir \tor\HiddenService HiddenServiceVersion 2 HiddenServicePort 8333 127.0.0.1:8333 HiddenServicePort 18333 127.0.0.1:18333 ```

bitcoin.conf file: (entries to be ADDED)

```

Change to what you recorded earlier

onion=127.0.0.1:9050 listen=1 externalip= discover=1 ```
Footnotes:
  • 1 Cert: {Subject: Intevation GmbH; SHA1: c13a65963ad53e78694dd223d518007791a05fe4}
  • 2 PGP Signing Key: 0xEF6E286DDA85EA2A4BA7DE684E2C6E8793298290
  • 3 PGP Signing Key: 0x01EA5486DE18A882D4C2684590C8019E36C2E964
submitted by brianddk to Bitcoin [link] [comments]

Windows / Linux Guide to using Trezor with Bitcoin Core (HWI)

This is a guide to using your Trezor with Bitcoin Core. It may seem like more trouble than it's worth but many applications use Bitcoin Core as a wallet such as LND, EPS, and JoinMarket. Learning how to integrate your Trezor into a Bitcoin Core install is rather useful in many unexpected ways. I did this all through the QT interfaces, but it's simple to script. There is a much simpler guide available from the HWI github, and the smallest Linux TLDR is here
Unfortunately, I don't have access to a Coldcard or Ledger. I'm not sure how the setpin or -stdinpass parameters are handled on that HW.

( A ) Install TrezorCTL, HWI, and build GUI

You only need to set the wallet up once, but may repeat to upgrade

( A.I ) Download extract and install HWI

  1. Download and isntall Python
  2. Download https://github.com/bitcoin-core/HWI/archive/1.1.2.zip
  3. Extract it to a working folder (assumes C:\User\Reddit\src\HWI)
  4. Change Directory (cd) to working folder cd "C:\User\Reddit\src\HWI"
  5. Setup venv python -m venv .venv
  6. Enter venv .venv\Scripts\activate.bat 1
  7. Install dependencies python -m pip install -U setuptools pip wheel
  8. Install TrezorCTL python -m pip install trezor[hidapi]
  9. Install HWI python -m pip install hwi pyside2
  10. Download github.com/libusb/libusb/releases/download/v1.0.23/libusb-1.0.23.7z
  11. Extract MS64\dll\libusb-1.0.dll from the archive
  12. Copy to pywin copy libusb-1.0.dll .venv\Lib\site-packages\pywin32_system32\

( A.II ) Build the QT UI files

  1. Download and install MSYS2
  2. Launch a mingw64.exe shell
  3. CD to working folder cd "C:\User\Reddit\src\HWI"
  4. Enter venv source .venv/Scripts/activate 1
  5. Run UI build bash contrib/generate-ui.sh

( B ) Create a Trezor wallet in Bitcoin Core (testnet)

You only need to set the wallet up once, no private key data is stored, only xpub data

( B.I ) Retrieve keypool from HWI-QT

  1. Launch hwi-qt.exe --testnet (assuming testnet)
  2. Click Set passphrase (if needed) to cache your passphrase then click Refresh
  3. Select you trezor from the list then click Set Pin (if needed)
  4. Ensure your Trezor in the dropdown has a fingerprint
  5. Select Change keypool options and choose P2WPKH
  6. Copy all the text from the Keypool textbox

( B.II ) Create the wallet in Bitcoin QT

  1. Launch Bitcoin Core (testnet) (non-pruned) 2
  2. Select Console from the Window menu
  3. Create a wallet createwallet "hwi" true
  4. Ensure that hwi is selected in the console wallet dropdown
  5. Verify walletname using the getwalletinfo command
  6. Import keypool importmulti '' (note ' caging)
  7. Rescan if TXNs are missing rescanblockchain 3

( C.I ) Grab Tesnet coins

  1. Select the Receive tab in Bitcoin Core (testnet)
  2. Ensure that the Wallet dropdown has hwi selected
  3. Select Create new receiving address and copy address
  4. Google "bitcoin testnet faucet" and visit a few sites
  5. Answer captcha and input your addressed copied from C.I.3

( D ) Spending funds with HWI

This is how you can spend funds in your Trezor using Bitcoin Core (testnet)

( D.I ) Create an unsigned PSBT

  1. Select the Send tab in Bitcoin Core (testnet)
  2. Ensure that the Wallet dropdown has hwi selected
  3. Verify your balance in Watch-only balance
  4. Rescan if balance is wrong (see B.II.7) 3
  5. Craft your TXN as usual, then click Create Unsigned
  6. Copy the PSBT to your clipboard when prompted

( D.II ) Sign your PSBT

  1. In HWI-QT click Sign PSBT
  2. Paste what you copied in D.I.6 in PSBT to Sign field
  3. Click Sign PSBT
  4. Copy the text for PSBT Result

( D.III ) Broadcast your TXN

  1. Select the Console window in Bitcoin Core (testnet)
  2. Ensure that the Wallet dropdown has hwi selected
  3. Finalize PSBT: finalizepsbt
  4. Copy the signed TXN hex from the hex field returned
  5. Broadcast TXN: sendrawtransaction

Final Thoughts

I did this all through the GUI interfaces for the benefit of the Windows users. Windows console is fine, but the quote escaping in windows console is nightmarish. Powershell would be good, but that throws this on a whole another level for most Windows folks.
There is also the need to use HWI-QT due to a bug in blank passphrases on the commandline. You can work around it by toggling passphrase off or on, but again, it's more than I wanted to spell out.
Footnotes:
  • 1. - Later version of python put the activate script under 'bin' instead of 'Script'
  • 2. - You can run pruned, but you need to have a fresh wallet
  • 3. - Rescan is automatic on 'importmulti' but I was pruned so it was wierd
submitted by brianddk to Bitcoin [link] [comments]

txindex=1 server=1 question (node, rpc)

Edit: solved! Just needed to wait for indexing to catch up
Hi all I'm trying to use btc-rpc-explorer
https://github.com/janoside/btc-rpc-explorer
I have a full node via bitcoin qt. Can I use qt for block explorer?
I launch block explorer and I'm getting rpc error. The webpage states "check rpc connection info"
The github project states I need server=1 and txindex=1. Can I make qt run with these settings? I tried adding them to the .conf but how can I confirm qt is running with these options, in console somehow?
In case I can't use qt for this I downloaded bitcoind. It looks like I can start the daemon with txindex=1 and server=1 but still getting same connection problem with btc-rpc-explorer.
Do I have to do -reindex=1? Can I do that within qt? If not and I use bitcoin cli will it disrupt qt in any way?
Thanks
Edit: this is on Ubuntu
submitted by redditor157b to Bitcoin [link] [comments]

Windows Guide to using Trezor with Bitcoin Core (HWI)

This is a guide to using your Trezor with Bitcoin Core. It may seem like more trouble than it's worth but many applications use Bitcoin Core as a wallet such as LND, EPS, and JoinMarket. Learning how to integrate your Trezor into a Bitcoin Core install is rather useful in many unexpected ways. I did this all through the QT interfaces, but it's simple to script. There is a much simpler guide available from the HWI github, and the smallest TLDR is here

( A ) Install TrezorCTL, HWI, and build GUI

You only need to set the wallet up once, but may repeat to upgrade

( A.I ) Download extract and install HWI

  1. Download and isntall Python
  2. Download https://github.com/bitcoin-core/HWI/archive/1.1.2.zip
  3. Extract it to a working folder (assumes C:\User\Reddit\src\HWI)
  4. Change Directory (cd) to working folder cd "C:\User\Reddit\src\HWI"
  5. Setup venv python -m venv .venv
  6. Enter venv .venv\Scripts\activate.bat 1
  7. Install dependencies python -m pip install -U setuptools pip wheel
  8. Install TrezorCTL python -m pip install trezor[hidapi]
  9. Install HWI python -m pip install hwi pyside2
  10. Download github.com/libusb/libusb/releases/download/v1.0.23/libusb-1.0.23.7z
  11. Extract MS64\dll\libusb-1.0.dll from the archive
  12. Copy to pywin copy libusb-1.0.dll .venv\Lib\site-packages\pywin32_system32\

( A.II ) Build the QT UI files

  1. Download and install MSYS2
  2. Launch a mingw64.exe
  3. CD to working folder cd "C:\User\Reddit\src\HWI"
  4. Enter venv source .venv/Scripts/activate 1
  5. Run UI build bash contrib/generate-ui.sh

( B ) Create a Trezor wallet in Bitcoin Core (testnet)

You only need to set the wallet up once, no private key data is stored, only xpub data

( B.I ) Retrieve keypool from HWI-QT

  1. Launch hwi-qt.exe --testnet (assuming testnet)
  2. Click Set passphrase (if needed) to cache your passphrase then click Refresh
  3. Select you trezor from the list then click Set Pin (if needed)
  4. Ensure your Trezor in the dropdown has a fingerprint
  5. Select Change keypool options and choose P2WPKH
  6. Copy all the text from the Keypool textbox

( B.II ) Create the wallet in Bitcoin QT

  1. Launch Bitcoin Core (testnet) (non-pruned) 2
  2. Select Console from the Window menu
  3. Create a wallet createwallet "hwi" true
  4. Ensure that hwi is selected in the console wallet dropdown
  5. Verify walletname using the getwalletinfo command
  6. Import keypool importmulti '' (note ' caging)
  7. Rescan if TXNs are missing rescanblockchain 3

( C.I ) Grab Tesnet coins

  1. Select the Receive tab in Bitcoin Core (testnet)
  2. Ensure that the Wallet dropdown has hwi selected
  3. Select Create new receiving address and copy address
  4. Google "bitcoin testnet faucet" and visit a few sites
  5. Answer captcha and input your addressed copied from C.I.3

( D ) Spending funds with HWI

This is how you can spend funds in your Trezor using Bitcoin Core (testnet)

( D.I ) Create an unsigned PSBT

  1. Select the Send tab in Bitcoin Core (testnet)
  2. Ensure that the Wallet dropdown has hwi selected
  3. Verify your balance in Watch-only balance
  4. Rescan if balance is wrong (see B.II.7) 3
  5. Craft your TXN as usual, then click Create Unsigned
  6. Copy the PSBT to your clipboard when prompted

( D.II ) Sign your PSBT

  1. In HWI-QT click Sign PSBT
  2. Paste what you copied in D.I.6 in PSBT to Sign field
  3. Click Sign PSBT
  4. Copy the text for PSBT Result

( D.III ) Broadcast your TXN

  1. Select the Console window in Bitcoin Core (testnet)
  2. Ensure that the Wallet dropdown has hwi selected
  3. Finalize PSBT: finalizepsbt
  4. Copy the signed TXN hex from the hex field returned
  5. Broadcast TXN: sendrawtransaction

Final Thoughts

I did this all through the GUI interfaces for the benefit of the Windows users. Windows console is fine, but the quote escaping in windows console is nightmarish. Powershell would be good, but that throws this on a whole another level for most Windows folks.
There is also the need to use HWI-QT due to a bug in blank passphrases on the commandline. You can work around it by toggling passphrase off or on, but again, it's more than I wanted to spell out.
Footnotes:
  • 1. - Later version of python put the activate script under 'bin' instead of 'Script'
  • 2. - You can run pruned, but you need to have a fresh wallet
  • 3. - Rescan is automatic on 'importmulti' but I was pruned so it was wierd
submitted by brianddk to TREZOR [link] [comments]

Is it possible to use spruned with a GUI, and is it reliable/safe/trustworthy?

Greetings.
I would like to know if I can use the spruned Bitcoin client with a GUI, such as GTK, Qt or curses, and if it can be trusted on.
If any of this is not true (also, it has not been mantained for almost a year), would there be an alternative to this? To be more specific, a Bitcoin client that does not need to immediately download the blockchain (or does not need to download and keep more than a few megabytes of the blockchain), but it stores the user's wallet on the HDD. Like pruning, but using much less disk space than what Bitcoin uses right now (about 20 GB).
NOTE: The spruned Bitcoin client can be found in https://github.com/gdassori/spruned
submitted by JJ1013Reddit to Bitcoin [link] [comments]

I already downloaded the blockchain. How do I tell Core to use that copy?

I was previously using bitcoin-qt.exe, emulated on my Linux machine. I have lost the ability to emulate that. (I won't go into details.) I therefore downloaded the Ubuntu version of Bitcoin Core, and am about to try to install that.
It is asking me where I want to download the entire 300 GB blockchain, again. I have already downloaded it. I don't have room on my computer to download a second copy of it. It's already taking up 300 GB of space on my harddrive.
Do I have to delete my previous copy of the blockchain? Or can I tell Bitcoin Core where to find it, so that it doesn't have to redownload it all over again?
(I am also hoping this will save time; but time is less important to me than disk space.)
submitted by ElenTheMellon to BitcoinBeginners [link] [comments]

[ANN][ANDROID MINING][AIRDROP] NewEnglandcoin: Scrypt RandomSpike

New England
New England 6 States Songs: https://www.reddit.com/newengland/comments/er8wxd/new_england_6_states_songs/
NewEnglandcoin
Symbol: NENG
NewEnglandcoin is a clone of Bitcoin using scrypt as a proof-of-work algorithm with enhanced features to protect against 51% attack and decentralize on mining to allow diversified mining rigs across CPUs, GPUs, ASICs and Android phones.
Mining Algorithm: Scrypt with RandomSpike. RandomSpike is 3rd generation of Dynamic Difficulty (DynDiff) algorithm on top of scrypt.
1 minute block targets base difficulty reset: every 1440 blocks subsidy halves in 2.1m blocks (~ 2 to 4 years) 84,000,000,000 total maximum NENG 20000 NENG per block Pre-mine: 1% - reserved for dev fund ICO: None RPCPort: 6376 Port: 6377
NewEnglandcoin has dogecoin like supply at 84 billion maximum NENG. This huge supply insures that NENG is suitable for retail transactions and daily use. The inflation schedule of NengEnglandcoin is actually identical to that of Litecoin. Bitcoin and Litecoin are already proven to be great long term store of value. The Litecoin-like NENG inflation schedule will make NewEnglandcoin ideal for long term investment appreciation as the supply is limited and capped at a fixed number
Bitcoin Fork - Suitable for Home Hobbyists
NewEnglandcoin core wallet continues to maintain version tag of "Satoshi v0.8.7.5" because NewEnglandcoin is very much an exact clone of bitcoin plus some mining feature changes with DynDiff algorithm. NewEnglandcoin is very suitable as lite version of bitcoin for educational purpose on desktop mining, full node running and bitcoin programming using bitcoin-json APIs.
The NewEnglandcoin (NENG) mining algorithm original upgrade ideas were mainly designed for decentralization of mining rigs on scrypt, which is same algo as litecoin/dogecoin. The way it is going now is that NENG is very suitable for bitcoin/litecoin/dogecoin hobbyists who can not , will not spend huge money to run noisy ASIC/GPU mining equipments, but still want to mine NENG at home with quiet simple CPU/GPU or with a cheap ASIC like FutureBit Moonlander 2 USB or Apollo pod on solo mining setup to obtain very decent profitable results. NENG allows bitcoin litecoin hobbyists to experience full node running, solo mining, CPU/GPU/ASIC for a fun experience at home at cheap cost without breaking bank on equipment or electricity.
MIT Free Course - 23 lectures about Bitcoin, Blockchain and Finance (Fall,2018)
https://www.youtube.com/playlist?list=PLUl4u3cNGP63UUkfL0onkxF6MYgVa04Fn
CPU Minable Coin Because of dynamic difficulty algorithm on top of scrypt, NewEnglandcoin is CPU Minable. Users can easily set up full node for mining at Home PC or Mac using our dedicated cheetah software.
Research on the first forked 50 blocks on v1.2.0 core confirmed that ASIC/GPU miners mined 66% of 50 blocks, CPU miners mined the remaining 34%.
NENG v1.4.0 release enabled CPU mining inside android phones.
Youtube Video Tutorial
How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 1 https://www.youtube.com/watch?v=sdOoPvAjzlE How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 2 https://www.youtube.com/watch?v=nHnRJvJRzZg
How to CPU Mine NewEnglandcoin (NENG) in macOS https://www.youtube.com/watch?v=Zj7NLMeNSOQ
Decentralization and Community Driven NewEnglandcoin is a decentralized coin just like bitcoin. There is no boss on NewEnglandcoin. Nobody nor the dev owns NENG.
We know a coin is worth nothing if there is no backing from community. Therefore, we as dev do not intend to make decision on this coin solely by ourselves. It is our expectation that NewEnglandcoin community will make majority of decisions on direction of this coin from now on. We as dev merely view our-self as coin creater and technical support of this coin while providing NENG a permanent home at ShorelineCrypto Exchange.
Twitter Airdrop
Follow NENG twitter and receive 100,000 NENG on Twitter Airdrop to up to 1000 winners
Graphic Redesign Bounty
Top one award: 90.9 million NENG Top 10 Winners: 500,000 NENG / person Event Timing: March 25, 2019 - Present Event Address: NewEnglandcoin DISCORD at: https://discord.gg/UPeBwgs
Please complete above Twitter Bounty requirement first. Then follow Below Steps to qualify for the Bounty: (1) Required: submit your own designed NENG logo picture in gif, png jpg or any other common graphic file format into DISCORD "bounty-submission" board (2) Optional: submit a second graphic for logo or any other marketing purposes into "bounty-submission" board. (3) Complete below form.
Please limit your submission to no more than two total. Delete any wrongly submitted or undesired graphics in the board. Contact DISCORD u/honglu69#5911 or u/krypton#6139 if you have any issues.
Twitter Airdrop/Graphic Redesign bounty sign up: https://goo.gl/forms/L0vcwmVi8c76cR7m1
Milestones
Roadmap
NENG v1.4.0 Android Mining, randomSpike Evaluation https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/NENG_2020_Q3_report/NENG_2020_Q3_report.pdf
RandomSpike - NENG core v1.3.0 Hardfork Upgrade Proposal https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2020Q1_Report/Scrypt_RandomSpike_NENGv1.3.0_Hardfork_Proposal.pdf
NENG Security, Decentralization & Valuation
https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/2019Q2_report/NENG_Security_Decentralization_Value.pdf
Whitepaper v1.0 https://github.com/ShorelineCrypto/NewEnglandCoin/releases/download/whitepaper_v1.0/NENG_WhitePaper.pdf
DISCORD https://discord.gg/UPeBwgs
Explorer
http://www.findblocks.com/exploreNENG http://86.100.49.209/exploreNENG http://nengexplorer.mooo.com:3001/
Step by step guide on how to setup an explorer: https://github.com/ShorelineCrypto/nengexplorer
Github https://github.com/ShorelineCrypto/NewEnglandCoin
Wallet
Android with UserLand App (arm64/armhf), Chromebook (x64/arm64/armhf): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.5
Linux Wallet (Ubuntu/Linux Mint, Debian/MX Linux, Arch/Manjaro, Fedora, openSUSE): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.3
MacOS Wallet (10.11 El Capitan or higher): https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0.2
Android with GNUroot on 32 bits old Phones (alpha release) wallet: https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.4.0
Windows wallet: https://github.com/ShorelineCrypto/NewEnglandCoin/releases/tag/v1.3.0.1
addnode ip address for the wallet to sync faster, frequently updated conf file: https://github.com/ShorelineCrypto/cheetah_cpumineblob/mastenewenglandcoin.conf-example
How to Sync Full Node Desktop Wallet https://www.reddit.com/NewEnglandCoin/comments/er6f0q/how_to_sync_full_node_desktop_wallet/
TWITTER https://twitter.com/newenglandcoin
REDDIT https://www.reddit.com/NewEnglandCoin/
Cheetah CPU Miner Software https://github.com/ShorelineCrypto/cheetah_cpuminer
Solo Mining with GPU or ASIC https://bitcointalk.org/index.php?topic=5027091.msg52187727#msg52187727
How to Run Two Full Node in Same Desktop PC https://bitcointalk.org/index.php?topic=5027091.msg53581449#msg53581449
ASIC/GPU Mining Pools Warning to Big ASIC Miners Due to DynDiff Algo on top of Scrypt, solo mining is recommended for ASIC/GPU miners. Further more, even for mining pools, small mining pool will generate better performance than big NENG mining pool because of new algo v1.2.x post hard fork.
The set up configuration of NENG for scrypt pool mining is same as a typical normal scrypt coin. In other word, DynDiff on Scrypt algo is backward compatible with Scrypt algo. Because ASIC/GPU miners rely on CPU miners for smooth blockchain movement, checkout bottom of "Latest News" section for A WARNING to All ASIC miners before you decide to dump big ASIC hash rate into NENG mining.
(1) Original DynDiff Warning: https://bitcointalk.org/index.php?topic=5027091.msg48324708#msg48324708 (2) New Warning on RandomSpike Spike difficulty (244k) introduced in RandomSpike served as roadblocks to instant mining and provide security against 51% attack risk. However, this spike difficulty like a roadblock that makes big ASIC mining less profitable. In case of spike block to be mined, the spike difficulty immediately serve as base difficulty, which will block GPU/ASIC miners effectively and leave CPU cheetah solo miners dominating mining almost 100% until next base difficulty reset.
FindBlocks http://findblocks.com/
CRpool http://crpool.xyz/
Cminors' Pool http://newenglandcoin.cminors-pool.com/
SPOOL https://spools.online/
Exchange
📷
https://shorelinecrypto.com/
Features: anonymous sign up and trading. No restriction or limit on deposit or withdraw.
The trading pairs available: NewEnglandcoin (NENG) / Dogecoin (DOGE)
Trading commission: A round trip trading will incur 0.10% trading fees in average. Fees are paid only on buyer side. buy fee: 0.2% / sell fee: 0% Deposit fees: free for all coins Withdraw fees: ZERO per withdraw. Mining fees are appointed by each coin blockchain. To cover the blockchain mining fees, there is minimum balance per coin per account: * Dogecoin 2 DOGE * NewEnglandcoin 1 NENG
Latest News Aug 30, 2020 - NENG v1.4.0.5 Released for Android/Chromebook Upgrade with armhf, better hardware support https://bitcointalk.org/index.php?topic=5027091.msg55098029#msg55098029
Aug 11, 2020 - NENG v1.4.0.4 Released for Android arm64 Upgrade / Chromebook Support https://bitcointalk.org/index.php?topic=5027091.msg54977437#msg54977437
Jul 30, 2020 - NENG v1.4.0.3 Released for Linux Wallet Upgrade with 8 Distros https://bitcointalk.org/index.php?topic=5027091.msg54898540#msg54898540
Jul 21, 2020 - NENG v1.4.0.2 Released for MacOS Upgrade with Catalina https://bitcointalk.org/index.php?topic=5027091.msg54839522#msg54839522
Jul 19, 2020 - NENG v1.4.0.1 Released for MacOS Wallet Upgrade https://bitcointalk.org/index.php?topic=5027091.msg54830333#msg54830333
Jul 15, 2020 - NENG v1.4.0 Released for Android Mining, Ubuntu 20.04 support https://bitcointalk.org/index.php?topic=5027091.msg54803639#msg54803639
Jul 11, 2020 - NENG v1.4.0 Android Mining, randomSpike Evaluation https://bitcointalk.org/index.php?topic=5027091.msg54777222#msg54777222
Jun 27, 2020 - Pre-Announce: NENG v1.4.0 Proposal for Mobile Miner Upgrade, Android Mining Start in July 2020 https://bitcointalk.org/index.php?topic=5027091.msg54694233#msg54694233
Jun 19, 2020 - Best Practice for Futurebit Moonlander2 USB ASIC on solo mining mode https://bitcointalk.org/index.php?topic=5027091.msg54645726#msg54645726
Mar 15, 2020 - Scrypt RandomSpike - NENG v1.3.0.1 Released for better wallet syncing https://bitcointalk.org/index.php?topic=5027091.msg54030923#msg54030923
Feb 23, 2020 - Scrypt RandomSpike - NENG Core v1.3.0 Relased, Hardfork on Mar 1 https://bitcointalk.org/index.php?topic=5027091.msg53900926#msg53900926
Feb 1, 2020 - Scrypt RandomSpike Proposal Published- NENG 1.3.0 Hardfork https://bitcointalk.org/index.php?topic=5027091.msg53735458#msg53735458
Jan 15, 2020 - NewEnglandcoin Dev Team Expanded with New Kickoff https://bitcointalk.org/index.php?topic=5027091.msg53617358#msg53617358
Jan 12, 2020 - Explanation of Base Diff Reset and Effect of Supply https://www.reddit.com/NewEnglandCoin/comments/envmo1/explanation_of_base_diff_reset_and_effect_of/
Dec 19, 2019 - Shoreline_tradingbot version 1.0 is released https://bitcointalk.org/index.php?topic=5121953.msg53391184#msg53391184
Sept 1, 2019 - NewEnglandcoin (NENG) is Selected as Shoreline Tradingbot First Supported Coin https://bitcointalk.org/index.php?topic=5027091.msg52331201#msg52331201
Aug 15, 2019 - Mining Update on Effect of Base Difficulty Reset, GPU vs ASIC https://bitcointalk.org/index.php?topic=5027091.msg52169572#msg52169572
Jul 7, 2019 - CPU Mining on macOS Mojave is supported under latest Cheetah_Cpuminer Release https://bitcointalk.org/index.php?topic=5027091.msg51745839#msg51745839
Jun 1, 2019 - NENG Fiat project is stopped by Square, Inc https://bitcointalk.org/index.php?topic=5027091.msg51312291#msg51312291
Apr 21, 2019 - NENG Fiat Project is Launched by ShorelineCrypto https://bitcointalk.org/index.php?topic=5027091.msg50714764#msg50714764
Apr 7, 2019 - Announcement of Fiat Project for all U.S. Residents & Mobile Miner Project Initiation https://bitcointalk.org/index.php?topic=5027091.msg50506585#msg50506585
Apr 1, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50417196#msg50417196
Mar 27, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50332097#msg50332097
Mar 17, 2019 - Disclosure on Large Buying on NENG at ShorelineCrypto Exchange https://bitcointalk.org/index.php?topic=5027091.msg50208194#msg50208194
Feb 26, 2019 - Community Project - NewEnglandcoin Graphic Redesign Bounty Initiated https://bitcointalk.org/index.php?topic=5027091.msg49931305#msg49931305
Feb 22, 2019 - Dev Policy on Checkpoints on NewEnglandcoin https://bitcointalk.org/index.php?topic=5027091.msg49875242#msg49875242
Feb 20, 2019 - NewEnglandCoin v1.2.1 Released to Secure the Hard Kork https://bitcointalk.org/index.php?topic=5027091.msg49831059#msg49831059
Feb 11, 2019 - NewEnglandCoin v1.2.0 Released, Anti-51% Attack, Anti-instant Mining after Hard Fork https://bitcointalk.org/index.php?topic=5027091.msg49685389#msg49685389
Jan 13, 2019 - Cheetah_CpuMiner added support for CPU Mining on Mac https://bitcointalk.org/index.php?topic=5027091.msg49218760#msg49218760
Jan 12, 2019 - NENG Core v1.1.2 Released to support MacOS OSX Wallet https://bitcointalk.org/index.php?topic=5027091.msg49202088#msg49202088
Jan 2, 2019 - Cheetah_Cpuminer v1.1.0 is released for both Linux and Windows https://bitcointalk.org/index.php?topic=5027091.msg49004345#msg49004345
Dec 31, 2018 - Technical Whitepaper is Released https://bitcointalk.org/index.php?topic=5027091.msg48990334#msg48990334
Dec 28, 2018 - Cheetah_Cpuminer v1.0.0 is released for Linux https://bitcointalk.org/index.php?topic=5027091.msg48935135#msg48935135
Update on Dec 14, 2018 - NENG Blockchain Stuck Issue https://bitcointalk.org/index.php?topic=5027091.msg48668375#msg48668375
Nov 27, 2018 - Exclusive for PC CPU Miners - How to Steal a Block from ASIC Miners https://bitcointalk.org/index.php?topic=5027091.msg48258465#msg48258465
Nov 28, 2018 - How to CPU Mine a NENG block with window/linux PC https://bitcointalk.org/index.php?topic=5027091.msg48298311#msg48298311
Nov 29, 2018 - A Warning to ASIC Miners https://bitcointalk.org/index.php?topic=5027091.msg48324708#msg48324708
Disclosure: Dev Team Came from ShorelineCrypto, a US based Informatics Service Business offering Fee for service for Coin Creation, Coin Exchange Listing, Blockchain Consulting, etc.
submitted by honglu69 to NewEnglandCoin [link] [comments]

Bitcoin Tor

Subject: PSA: Make your node reachable by using Tor
There is usually a post every few months with someone asking for tips on how to make their node reachable. It's always a hard question to answer since its impossible to know what type of routers and firewalls they are going to have to punch through. This is especially difficult in college dorms. One cheap (and easy) way around it is to to just jump through a few extra steps to make your bitcoin node a bitcoin onion node. Tor is great about traversing routers and firewalls like a hot knife through butter.
  1. Download, verify1, install and initialize Gpg4win
  2. Download, verify2, install, and launch Tor Browser
  3. Download, verify3, install, and launch Bitcoin Core
  4. Launch an Admin command console in the directory with tor.exe
  5. Install the Tor service: tor.exe --service install
  6. CD to service dir: cd %windir%\ServiceProfiles\LocalService\AppData\Roaming\tor
  7. Create and edit a file called torrc with the contents suggested below
  8. Restart tor: tor --service stop && tor --service start
  9. Record your onion hostname: type .\HiddenService\hostname as
  10. Add the bitcoin.conf options suggested below
  11. Restart the bitcoin-qt program
  12. Verify node connectivity at https://bitnodes.io/nodes/-8333/

torrc file: (replace c:\windows with the proper path as needed)

```

Change to C:\Windows\ServiceProfiles\LocalService\AppData\Roaming

Log notice file \tor\service.log HiddenServiceDir \tor\HiddenService HiddenServiceVersion 2 HiddenServicePort 8333 127.0.0.1:8333 HiddenServicePort 18333 127.0.0.1:18333 ```

bitcoin.conf file: (entries to be ADDED)

```

Change to what you recorded earlier

onion=127.0.0.1:9050 listen=1 externalip= discover=1 ```
Footnotes:
  • 1 - Cert-Subject: "Intevation GmbH"  ;  Cert-SHA1: c13a65963ad53e78694dd223d518007791a05fe4
  • 2 - PGP Signing Key: 0xEF6E286DDA85EA2A4BA7DE684E2C6E8793298290
  • 3 - PGP Signing Key: 0x01EA5486DE18A882D4C2684590C8019E36C2E964
submitted by brianddk to brianddk [link] [comments]

Make your own stakebox. Ultimate beginners guide how to compile any wallet on AARCH64 (Raspbery pi and other SBC)

I contemplated to wrote this for a long time, so it's finally time.
As you know a lot of altcoins uses PoS (Proof-of-stake) way of "mining" coins. Which basically means, that you hold coins on your unlocked wallet and you are receiving stakes as a reward. This requires very little power and it can bring you a lot of rewards, at just 10W from the wall.
So first I am using latest Raspbian on RPI4B 4GB in this example.Setting up Raspbian is not part of this process since it's very well documented. I recommend to change user from pi to something else due to security concerns and you can also do other stuff just search "security Raspberry PI" and you find a lot of articles, but this is not the focus of this guide.
I know there are a lot of guides on the internet, but I am using like 5 sources, so it's compiled what other people wrote and some of my research.
I am using AnyDesk insted of SSH or VNC server, because it works it's ligthweit and it just works.
So after you see the gui of Raspbian, just launch terminal (CTRL + ALT + T) and do basic thing:
sudo apt-get update && sudo apt-get upgrade
Than press Y and let it run, after is finished, we need to prepare so dependency packages. Since most of the wallets using Berkeley DB 4.8 we need to obtain it.
So in terminal wrote:
cd cd Downloads wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz tar -xzvf db-4.8.30.NC.tar.gz cd db-4.8.30.NC/build_unix ../dist/configure --enable-cxx make sudo make install 
So wait unti it's finished and than you can delete files in Downloads folder in gui or use:
sudo rm -r [folder] 
So next thing we need to install some libraries.
sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev devscripts libdb++-dev libsodium-dev 
And pres y and let it run. After that another set of libraries:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libcrypto++- dev libminiupnpc-dev qt5-default 
And then again pres y and let it run. Some wallets need older version of libssl1.0-dev, so for for safe compiling we install that as well:
sudo apt-get install libssl1.0-dev 
Pres y and let it run. Warning don't use sudo-apt get autoremove, since it would wipe this package, since it's old.
Next thing we are going to obtain Bitcoin PPA filest, which can be done like this.
cd /etc/apt/sources.list.d/ sudo nano bitcoin.list 
Paste this in there:
deb-src http://ppa.launchpad.net/bitcoin/bitcoin/ubuntu artful main 
And CTRL+X and than y, then do this:
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv C70EF1F0305A1ADB9986DBD8D46F45428842CE5E sudo apt-get update 
So now we are ready for compiling. So we are going create folders. CD yourself where this folder should be situated, if you for example have plugged in some external drive. Then:
mkdir Crypto cd Crypto 
And then we have to choose wallet which you want to compile. I am choosing Streamies (STRMS) as an example, since it's pretty good coin for staking. So:
mkdir Streamies cd Streamies 
Then go to the github page and click on the green button on the left and click copy to clipboard, which gives you git link.
git clone https://github.com/Streamies/Streamies.git 
Watch the output folder which it creates, it's stated in the first two lines and copy then by highliting the text and CTRL+SHIFT+C copy it to your clipboard.
cd Streamies (this is that git created folder) ./autogen.sh ./configure CPPFLAGS="-I/uslocal/BerkeleyDB.4.8/include -O2" LDFLAGS="-L/uslocal/BerkeleyDB.4.8/lib" sudo make (this could take hours) sudo make install 
And you are done, files is going to be in folder /uslocal/bin (DO NOT delete git created folder, because you are going to need it for faster compiling, when wallet get's and update.)
cd /uslocal/bin 
Now you can list files by:
ls 
And then you can copy/move them where ever you want by using:
sudo mv * [destination full path] 
Let it run and go back to folder where you move those files.
sudo chmod +x streamies-qt (since we want to run wallet) 
In most cases compiled files are going to in format of "shared library" so we need to create script to run it. Open up a text editor from gui or through nano. And paste this to that file:
#!/bin/bash ./streamies-qt 
And save it as a sh file, for example run.sh. Then we need to make it runnable so:
sudo chmod +x run.sh 
Now to run it, it's just:
./run.sh 
And here we are glorious GUI wallet appears and you are done, you can paste blockchain, wallet.dat from other sources, so this migration is pretty easy and you, if you have it on for exaple flash disk.
So this is basic how to compile QT wallets on AARCH64. I am running 7 wallets, 2 of those are Masternodes and RPI 4B 4GB would handle way more, I am at best on half of my RAM.
Some wallets need more package, but it's not much of and issue, since compiling stops and you just copy paste nape which is missing put it in the google and add "apt-get" after the name of package and you are going to see, what is the name of the packages so it can be retreived from package assinstant aka apt-get. So basically:
sudo apt-get install [package name] 
Then press y and again wrote:
sudo make 
This process is going to continue where it was left off, so nothing is going to run from beginning.
Updating wallets is basically exactly same, just repeat steps from "git clone" and after that proceed as it was written above.
So I hope this helps some of you, to use this at home and not on some VPS, if you are anxious as me, to host my wallets on remote server.
submitted by M1chlCZ to CryptoCurrency [link] [comments]

Forgot to upgrade your node? Here's how to get back onto the upgraded BCH network:

These instructions are for those who left old versions (0.20.12 or older) of Bitcoin ABC running through the May 15th, 2020 upgrade. Follow these instructions to get back on the main network.
If you are using bitcoin-qt, follow these steps:
  1. Stop your running node
  2. Delete the list of nodes you have banned: rm ~/.bitcoin/banlist.dat
  3. Download version 0.21.x from https://download.bitcoinabc.org/latest/
  4. Start up the new version (./bin/bitcoin-qt)
  5. Open Help -> Debug window
  6. In the console type reconsiderblock 00000000000000000033dfef1fc2d6a5d5520b078c55193a9bf498c5b27530f7
  7. Wait until your node is on the correct chain. This could take some time if your old node was running for a while, and other nodes banned you on the network. You can check that you are on the correct chain by typing getblockchaininfo and verifying the information with a public block explorer such as https://explorer.bitcoin.com/bch, https://blockchair.com/bitcoin-cash, or https://cash.coin.dance/.
If you are running bitcoind, follow these steps:
  1. Stop your running node
  2. Delete the list of nodes you have banned: rm ~/.bitcoin/banlist.dat
  3. Download version 0.21.x from https://download.bitcoinabc.org/latest/
  4. Start up the new version (./bin/bitcoind)
  5. Use bitcoin-cli to type: ./bin/bitcoin-cli reconsiderblock 00000000000000000033dfef1fc2d6a5d5520b078c55193a9bf498c5b27530f7
  6. Wait until your node is on the correct chain. This could take some time if your old node was running for a while, and other nodes banned you on the network. You can check that you are on the correct chain by typing ./bin/bitcoin-cli getblockchaininfo and verifying the information with a public block explorer such as https://explorer.bitcoin.com/bch, https://blockchair.com/bitcoin-cash, or https://cash.coin.dance/.
submitted by Mengerian to btc [link] [comments]

TecraCoin works on core wallet upgrade

TecraCoin works on core wallet upgrade

What is a TecraCoin TCR Wallet?

Crypto wallet is the basic software needed to use the cryptocurrencies properly. Every blockchain of cryptocurrency must have its own basic wallet (the most commonly used are the desktop and server ones), which is usually composed from the name of the cryptocurrency and the word “Core”, for example Bitcoin Core, Litecoin Core etc. Every developing blockchain project has to implement Core updates in order to make the system more secure and solid because the correct functioning of the basic wallet is crucial . (Tecra’s basic wallet is “Tecra QT wallet” — you can download from the GutHub — https://tecracoin.io/wallets)
This week, Teсra developers have prepared the first part of the update of the above mentioned wallet. Since the blockchain used by Tecra is the fork of the widely recognized Zcoin blockchain, we are working on the upgrade from version 11 to version 14 which includes all of the changes from the versions 12 and 13. The most significant reason for such changes was to enhance the masternodes and increase the safety of our blockchain.

Why is this update essential?

Masternodes are awarded in order of precedence. According to the previously set order, the last MN to receive the reward is transferred to the end of the queue, and from the next block, the reward will be given to the next MN. In every block, there is a vote between nodes to decide which one of the MasterNodes will get the reward from this particular block. However, there might be the situation in which MN that was supposed to get the reward will not receive it.
Currently The MN communication between nodes takes place off-chain, and the data is stored in the memory, without being saved to the blockchain. The winner of the voting receives the reward via the payment in the next block. However, sometimes it might be possible for the node to “unpin” from the rest of the blockchain’s node network and conduct its own voting, contrary to the majority of MNs’ preferences. This leads to a MN blockage and the approved winner of the vote might not receive the reward.
Following Zcoin’s solution Tecra will introduce a new masternodes launching and voting system. It will shift the process of their activation and voting directly to blockchain transactions. In result, we create the “deterministic masternodes” which cannot “unpin” from the voting chains. This guarantees that the approved winner of the vote will definitely be the only one. This will be the biggest change introduced when updating to Core 14.
https://preview.redd.it/livp48zlv0c51.jpg?width=875&format=pjpg&auto=webp&s=2af1ef5a2748b8848ad3a34917eff293d3f256b4
submitted by tecraspace to u/tecraspace [link] [comments]

Running BitcoinQT, want to run lightning node also - help needed

So running BitcoinQT is fairly straight forward, download it, install it, sync the blockchain. I'm running Ubuntu on a fairly low spec mini PC, I would love to add a lightning network node to this too but cannot find a guide that is simple enough to install it and get it running.
How far off are we to having a nice slick piece of software like BitcoinQT but for lightning?
submitted by hungdoge to Bitcoin [link] [comments]

9. bitcoind Installing Bitcoin-QT prevent bitcoin-qt client from crashing on the mac [Streamed] - Compiling a Bitcoin Wallet for Windows Bitcoin Tutorial - download bitcoin core

Linux: clicking on bitcoin: links was broken if you were using a Gnome-based desktop. Fix a hang-at-shutdown bug that only affects users that compile their own version of Bitcoin against Boost versions 1.50-1.52. Other changes DOWNLOADS QT WALLET (WINDOWS) QT WALLET (OTHER) Electrum wallet mining ... Download; Press enter to begin your search. DOWNLOADS. QT WALLET (WINDOWS) QT WALLET (OTHER) Electrum wallet. mining. BCD / USD $ BCD / BTC ฿ Information. Bitcoin Diamond BCD Pay BCD Bazaar Explorer Download About. About Us Our Team Press kit. Contacts Us [email ... Download Qt Bitcoin Trader for free. Secure Trading Client for most popular Bitcoin exchanges. Supported Exchanges: HitBTC, Bittrex, Binance, Bitfinex, BTC-e, Bitstamp, GOC io, Indacoin, YoBit net, BitmarketPL and BTCChina. This software helps you open and cancel orders very fast. 1. Install Bitcoin-Qt Since version 0.9, Bitcoin-Qt was renamed to Bitcoin Core t o reduce confusion between Bitcoin-the-network and Bitcoin-the-software. Bitcoin Core is a full Bitcoin client. It is a thick client, meaning it requires the full blockchain (explained below) on local disk to operate and expose blockchain back to the network to help relay and verify transactions. Digital money that’s instant, private, and free from bank fees. Download our official wallet app and start using Bitcoin today. Read news, start mining, and buy BTC or BCH.

[index] [4861] [21263] [10825] [19172] [28233] [12864] [22324] [14265] [8122] [18487]

9. bitcoind

Increase slow download and sync of bitcoin blockchain on Mac - Duration: 2:01. Daniel's Tutorials 1,043 views. 2:01. How To Store Your Bitcoins Safely ... Qt Bitcoin Trader ... Bitcoin Tutorial - download bitcoin core Take time to educate yourself Bitcoin is different from what you know and use every day. Before you start using Bitcoin for any serious transaction, be ... 💾 DOWNLOAD LINK: https://bit.ly/32sxvlS 🔐 PASSWORD: 1234 =====Don't forget===== LIKE COMMENT SHARE SUBSCRIBE How to start using the bitcoin testnet and how to earn free testcoins. The bitcoin testnet is always useful if you want to try out how to use bitcoins withou... New RPC commands: - getblockchaininfo - getblockcount - getpeerinfo - getconnectioncount - stop Linux terminal new stuff: watch * All other commands have been covered in previous videos www ...

#